短波信道数字传输脉冲成形技术研究
DOI:
作者:
作者单位:

(1.海军航空工程学院电子信息工程系,山东 烟台 264001;2.海军航空工程学院研究生管理大队,山东 烟台 264001;3.海军驻沈阳地区航空军事代表室,沈阳,110034)

作者简介:

通讯作者:

中图分类号:

TN926+.2

基金项目:


Research on Pulse Shaping Technology for the Data Transmission on Shortwave Channel
Author:
Affiliation:

(1.Naval Aeronautical Engineering Institute Department of Electronic and Information Engineering,Yantai Shandong 264001,China;2.Naval Aeronautical Engineering Institute Graduate Students’ Brigade,Yantai Shandong 264001,China;3.Aeronautical Military Representatives Office of NED in Shenyang,Shenyang 110034,China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    短波窄带信道上的数据传输,要求将信号的带宽限制在3kHz语音频带内,当系统带宽小于数据信息所需的奈奎斯特最小带宽时,脉冲时域范围的扩展产生的码间串扰会降低系统的误差性能。文章阐明了脉冲成形技术可以压缩信号的频谱,分析了恰当选择的平方根升余弦脉冲成形滤波器可以明显提高短波信道数据传输的误差性能。

    Abstract:

    Data transmissions on narrow-band shortwave channel desire the bandwidth of signal to be in the voice band, which is between 300 and 3400 Hz. If the bandwidth of system is smaller than the Nyquist bandwidth that data transmission needs, pulses expend in the time domain will depress the error performance of the system. Pulse shaping technology can be used to compress the bandwidth of signal. It shows that proper square root raised cosine pulse shaping filter can improve the error performance of data transmission on shortwave channel.

    参考文献
    相似文献
    引证文献
引用本文

周新力,肖金光,吴海荣,郭健.短波信道数字传输脉冲成形技术研究[J].海军航空大学学报,2007,22(4):412-416
ZHOU Xin-li, XIAO Jin-guang, WU Hai-rong, GUO Jian. Research on Pulse Shaping Technology for the Data Transmission on Shortwave Channel[J]. JOURNAL OF NAVAL AVIATION UNIVERSITY,2007,22(4):412-416

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-07-05
  • 出版日期: